Over the years at THR (which is cool to write/say as we get into the groove for our fourth season), Gavin and I have spoken a ton about gear. He is, hands down, the keenest gear reviewer out there. Which, it turns out, I’m lucky for. We’ll get to that in a minute.

A month or so ago, we were bantering on the phone, and Gavin explained that a pair of Heritage Lab BC90 V2s were on the way to Bend, courtesy of a kind friend shuttling the planks from Wilson, WY, to Bend’s high desert. I didn’t need much persuading, but there was some. Let’s begin with the width: 90mm underfoot. That lands in the spring/steeper/firmer end of the quiver spectrum, for me. That includes a 171 Black Crows Mentis (down from a 178—thanks, Adam), a 172 Dynastar Vertical 88 (a hand-me-down, thanks, Aidan), and a 171 Zero G 96. (I routinely use a 169 Rossi Escaper 97 Nano, such a great ski, but for me, it’s more of an all-season all-arounder). That’s a lot of skinny skis. While the Mentis, Vertical 88, and ZG 96 each have a sweet spot, they overlap significantly in a comparative Venn diagram. So why another ski in this width class?

I trust in Gavin. So when Gavin says I’ve got a ski for you… you pull bindings off an old pair and start thinking about skins. What made the BC90 V1 unique was its reverse-camber profile. I’m not a ski aficionado like Gavin, but I usually associate reverse-camber skis with wide, powder-oriented planks. The BC90 V2 gets a small camber-profile tweak, based on the brand’s cambered rocker profile of the FL105 V2, which, according to H Labs, has a low-camber pocket. It is confirmed that, on the BC90 V2, it is a very low-camber pocket, and not long, but… a bit of camber.
From what I can gather, Gavin thinks the BC90 V2 will be an asset on days when I’m not sure what to expect. Which is a lot of the time here. Cold smoke is rare. And what doesn’t work in that? I am keen to take these skis out on days when I expect less-than-ideal. Maybe some breakable, maybe some 3D-ish, rime-crusted alpine Volcano panels, wind effect, and a whole other array of the stuff we mostly get, but don’t necessarily want to mostly ski.
As the person mostly responsible for daily posts and the mag, it’s tough for me to track it all. Once the BC90 V2s were plopped on my porch (thank you, Morgan), I googled, “Heritage Labs BC90.” Of course, one of the first links that popped up was a THR review by Gavin. In short, Gavin was impressed.
In the review’s conclusion, however, I read this sentence: “This is among the most unique models I have tested, and for the right skier, this unique model will be awesome.” No second-guessing, no hesitation; surely, I am that right skier. (Right?) I think the interesting part between Gavin and me, beyond his better skiing style, is the zone change: east-of-the-crest Cascades compared to a range like the Tetons. Maritime compared to Intermountain transitional.
The BC90 V2 has rocker in the front, that wee aforementioned camber, and… then a rockered tail. From what I can gather, Gavin thinks the BC90 V2 will be an asset on days when I’m not sure what to expect. Which is a lot of the time here. Over the years, I’ve observed many degrees of “variable,” including elusive cold smoke. But what doesn’t work in that? I am keen to take these skis out on days when I expect less-than-ideal. Maybe some breakable, maybe some 3D-ish rime-crusted alpine Volcano panels, wind effect, dust on crust, and a whole other array of the stuff we mostly get, but don’t necessarily want to mostly ski.
So, I have questions. And with so many interesting variables at play with this ski—the rocker, the wee camber, sidecut, width, the tip and tail taper—I’m curious what the synergy will feel like. Will the grins, generally, be wider in typically frown-worthy snow? Will they be less hooky? Looser in some snow types? To be clear, I don’t want to set the BC90 V2s up for a poor experience and Marshal Olson, the craftsperson behind the brand, for a head-spinning review. So, of course, I’ll be taking these planks out for some powder laps, and, in spring, steeper corn/firm snow.
Interestingly, with the slightly modified camber profile, I am hoping to experience what Gavin found: “The BC90 is a 90mm underfoot, reverse camber ski. It features a somewhat directional recommended mount point at -10.5 cm [in the 184cm]. This combination makes for a ski that Marshal says (and I can confirm) floats like a more traditional 100-105mm ski.”


The skis are mounted with an ATK Crest binding, and I will likely use them with a Scarpa F1RS, La Sportiva Kilo, and, if this 90mm underfoot ski warrants, a Zero G Tour Pro. As Gavin pointed out in his review, full-rockered skis are sensitive to mount point, forward lean, and ramp angle. With the bit of camber on the V2, we’ll see if that dynamic is still in play. I’m reviewing a 177cm length. It’s a pretty straight cut, with a 28-meter turn radius and a mount point of -9.8 cm—so in the more directional family of mount points, something I usually prefer.

More on this in the full review—the build quality is immaculate. The skis are built in limited quantities, and according to Heritage Lab’s site, they are sold out.

H Labs says of the BC90V2, “WILD BACKCOUNTRY SNOW REVOLUTION.”
I’ll assume that’s not hyperbole, hype, or heresy. I could use a snow revolution.
Some Basics:
Core: Paulownia + poplar
Layup: Delam-proof triaxial carbon laminate with VDS damping
Price: $999
Current Availability: Sold out






Leave a Reply
You must be logged in to post a comment.